top of page

R.E.S.T. PROGRAM!

Residential Energy Saving Tune-ups!

Phoenix Energy Solutions provides a 1-YEAR FULL MAINTENANCE SOLUTION!

 

NOW THIS IS REAL VALUE!

  • Priority service - 24-hour response

  • 2 scheduled service appointments to keep your system running in top performance - a spring a/c tune up and a fall heating tune up.

  • Discounted $100 diagnostic for service calls.

  • 5% discount on new equipment installation.

  • 15% discount on any needed repairs throughout the year.

  • 18-month parts warranty on repairs

  • Extended equipment life, maximize energy efficiency.

  • Fully-transferable, written maintenance report. 

Air Conditioner SERVICE Includes:

1. Check and inspect drain line
2. Evaluate safety controls
3. Lubricate fan motor
4. Clean condenser coil
5. Infrared camera inspection of evaporator coil
6. Monitor refrigerant level
7. Calibrate thermostat
8. Check fan blades for tightness
9. Measure temperature difference for optimum cooling
10. Tighten electrical connections

11. Clean or replace filters
12. Monitor expansion valve
13. Check start and run capacitors
14. Check start and run delays
15. Adjust operating pressures as required
16. Measure voltage differences
17. Adjust bypass dampers where applicable
18. Measure for proper amp draws
19. Evaluate overall efficiency
20. Check integrity of accessible ducting

Furnace SERVICE Includes:

1. Check and inspect burner assembly
2. Check ignition system
3. Inspect heat exchanger
4. Monitor flue draft
5. Check sequencers
6. Test starting capabilities
7. Test safety controls
8. Clean or replace furnace filter
9. Check and inspect blower components
10. Measure for correct airflow

11. Tighten electrical connections
12. Measure volts/amps on motors
13. Lubricate all moving parts
14. Visually inspect condensate drains
15. Measure temperature difference
16. Check all breakers
17. Test cycle unit
18. Check thermostat calibration
19. Visually inspect all accessible ducting

bottom of page